Purple Haired Doll Amigurumi Free Pattern
The best quality amigurumi doll patterns are on this site for free. In this article, amigurumi purple haired doll pattern is with you.
Materials
Gazzal Baby Cotton
1 Nude rope (3445)
1 white rope (3432)
1 Green rope (3425)
1 yellow rope (3413)
1 Pink color rope (3411)
1 piece of Blue color rope (3451)
1 Coral color rope (3435)
2)2 mm crochet hook
Wire for neck
1 light, 1 dark, white and black cotton perle rope for eye embroidery
(If you want, you can separate and process the wool.)
Needle to handle
Bead Fiber, scissors
Abbreviations
sc: single crochet
inc: Increase
dec: Decrease
ch: chain
hdc: half double crochet
sl-st: slip stitch
Fabrication
First, let’s start by knitting the sleeves, let them stand on the edge. The baby will not be in the form of stitching, knitting completely, no sewing.
Arm (2 pieces)
We start with the tan rope.
1) 6sc into the magic ring
2)1inc, 5sc = 7sc
3)1inc, 6sc = 8sc
4)-20) (17 rows) 8sc
(We don’t fill the arms.)
Leg (2 pieces)
We start with the tan rope.
1) 6sc into the magic ring
2) (1sc, 1inc) * 3 = 9sc
3- 9) 9sc (7 rows)
We go on the green color rope.
10) (2sc, 1inc) * 3 = 12sc
11-14) 12sc
(We cut the rope on the first leg. On the second leg we continue without cutting.)
Body
We connect the two legs with 6 chains.
15) 12sc to 1st leg, 6sc to chain, 12sc to 2nd leg, 6sc to chain = 36sc
16-23) (8 rows) 36sc
We go to the skin color rope.
24-29) (6 rows) 36sc
30) (4sc, 1dec) * 6 = 30sc
31-32) 30sc
33) (3sc, 1dec) * 6 = 24sc
34-36) 24sc
37) (2sc, 1dec) * 6 = 18sc
Meanwhile, we add arms.
38)5sc, we knit 4 loops from both the arm and the body simultaneously with 4sc and tie the arm to the body, 5sc, again we knit 4 loops from both the arm and the body with 4sc. = 18sc
39)5sc, we knit the outer loops of the arm 4sc, we continue from the body 5sc, we knit the outer loops of the arm 4sc. = 18sc
We fill the body with fiber beads.
40) (1sc, 1dec) * 6 = 12sc
41) (2sc, 1dec) * 6 = 9sc
42-44) 9sc (3 rows)
In this section, we adjust and install the wire. It would be better if it was longer, especially in a baby girl, since there is a lot of thread on the head, it prevents it from bending. We wrap it with paper tape and with the help of a skewer, we make room for the wire to enter into our pre-filled baby and insert the wire. Its length is 14 cm. It would be nice if you set the wire so that it is inside the whole body and almost the whole head. After placing the wire, we fill the edges of the neck tightly so that there is no play.
Head
45) (2sc, 1inc) * 3 = 12sc
46) (1sc, 1inc) * 6 = 18sc
47) (2sc, 1inc) * 6 = 24sc
48) (3sc, 1inc) * 6 = 30sc
49) (4sc, 1inc) * 6 = 36sc
50) (5sc, 1inc) * 6 = 42sc
51) (6sc, 1inc) * 6 = 48sc
52) (7sc, 1inc) * 6 = 54sc
53) (8sc, 1inc) * 6 = 60sc
54-65) 60sc (12 rows)
66) (8sc, 1dec) * 6 = 54sc
67) (7sc, 1dec) * 6 = 48sc
68) (6sc, 1dec) * 6 = 42sc
69) (5sc, 1dec) * 6 = 36sc
70) (4sc, 1dec) * 6 = 30sc
(We’re starting to fill the head.)
71) (3sc, 1dec) * 6 = 24sc
72) (2sc, 1dec) * 6 = 18sc
73) (1sc, 1dec) * 6 = 12sc
(We are completing filling the head.)
74)6dec = 6sc
We close the head by collecting loops.
Our baby is finished.
We process the eye with 5 or 6 stitches in between. We make eyebrows, nose and mouth. You can also make the hair as often and as long as you want. The finished version is approximately 18 – 20 cm.
Dress
We start with white color rope.
1)We pull 27 chains, start from the 2nd chain and make 26 hdc.
2) Turn 1ch, 4sc, 4ch, jump 6 to 7th place 6sc, 4ch, 6 jump to 7th place bat 4sc.
3) Turn 1ch, 4sc, 4sc on 4ch, 6inc, 4sc on 4ch, 4sc = 28sc
4)1ch, 28sc
5)1ch, 1sc, 1inc = 42sc
6)1ch, 42sc
(After this row, we will change color constantly. I will write the color at the beginning of the row, you can knit it by changing it accordingly.)
7) (Green) 2sc, 1inc = 56sc end of row join with sl-st.
8-9) (White) 56sc (2 rows)
10) (Pink) 56sc
11-12) (White) 56sc (2 rows)
13) (Yellow) 56sc
14-15) (White) 56sc (2 rows)
16) (Coral) 56sc
17-18) (White) 56sc (2 rows)
19) (Blue) 56sc
20-21) (White) 56sc (2 rows)
22) We finish the dress by sl-st by completing the row by making 1 handrail, 1sc in each loop. In this order, we also do the process on the arm ends.