Amigurumi Wall Clock Free Crochet Pattern
Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns.
CUCKOO-CLOCK
Necessary materials:
• Yarn yellow, dark yellow, light green, green,
dark green, red, pink, blue, white,
black, brown and beige;
• A hook suitable for your yarn;
• Filler;
• Needles4
• scissors;
• 2 beads 2 mm and 2 – 4 mm;
• Felt yellow;
• 4 buttons of red color d-1 cm;
• 8 flowers 6 mm: 4 pink, 4 blue;
• Clockwork (more precisely, arrows);
• Thick cardboard;
• Super glue;
• Double sided tape.
ABBREVIATIONS
• CH – chain;
• Sl-st – slip stitch;
• Sc – single crochet;
• Hdc – half double crochet;
• Hd2c – half double 2 crochet;
• Dc – double crochet;
• İnc – increase;
• Dec – decrease.
FRONT PANEL (start with yellow yarn):
* Dial 8 CH *
1 row: from the second loop from the hook: 7 dc (7)
2 row: CH (or 2 CH, to whom it is more convenient), turn, 2 dc in one loop, 5 dc, 2 dc in
single loop (9)
3 row: CH, turn, 2 dc in one loop, 7 dc, 2 dc in one loop (11)
4 row: CH, turn, 2 dc in one loop, 9 dc, 2 dc in one loop (13)
* Change to a light green yarn *
5 row: CH, turn, 2 dc in one loop, 11 dc, 2 dc in one loop (15)
* Change to yellow yarn *
6 row: CH, turn, 2 dc in one loop, 13 dc, 2 dc in one loop (17)
* Change to dark yellow yarn *
7 row: CH, turn, 2 dc in one loop, 15 dc, 2 dc in one loop (19)
8 row: CH, turn, 2 dc in one loop, 17 dc, 2 dc in one loop (21)
* Change to yellow yarn *
9 row: CH, turn, 2 dc in one loop, 19 dc, 2 dc in one loop (23)
* Change to a light green yarn *
10 row: CH, rotation, 2 dc in one loop, 1 dc, (1 dc we knit in a loop in two rows
below, 2 dc) x6, 1 dc in the loop two rows below, 1 dc, 2 dc in one loop (25)
* Change to dark yellow yarn *
11 row: CH, turn, 2 dc in one loop, 23 dc, 2 dc in one loop (27)
12 row: CH, turn, 2 dc in one loop, 25 dc, 2 dc in one loop (29)
13 row: CH, turn, 2 dc in one loop, 27 dc, 2 dc in one loop (31)
* Change to yellow yarn *
14 row: CH, turn, dc to EACH loop (31)
* Change to a light green yarn *
15 row: CH, turn, dc to EACH loop (31)
* Change to dark yellow yarn *
16 row: CH, turn, dc to EACH loop (31)
* Change to red yarn *
17-18 rows: CH, turn, dc in EACH loop (31)
* Change to pink yarn *
19 row: CH, turn, dc to EACH loop (31)
20-31 rows: 2 CH, turn, skip the loop from which knitted CH, hd2c to EVERY
loop (31)
* Change to red yarn *
32-33 rows: CH, turn, dc per EACH loop (31)
* Change to blue yarn *
34 row: CH, turn, dc to EACH loop (31)
35-39 rows: 2 CH, turn, skip the loop from which knitted CH, hd2c to EVERY loop (31)
40 row: 20-31 rows: 2 CH, turn, skip the loop from which knitted CH, hd2c in every loop (31)
Tie a part in a circle dc.
Finish knitting. Fasten and cut the thread.
Take cardboard about 1 cm (on all sides) less than the resulting part.
Glue double-sided tape around the edges.
Glue the part to the cardboard, bending the edges.
DIGITAL (start with yellow yarn):
* Dial 6 CH and lock into the ring (do not pull it together!) *
1 row: 2 dc in each loop (12)
2 row: (1 dc, 2 dc in each loop) x6 (18)
* Change to dark yellow yarn *
3 row: (2 dc, 2 dc in each loop) x6 (24)
* Change to yellow yarn *
4th row: (3 dc, 2 dc per EACH loop) x6 (30)
5 row: (4 dc, 2 dc in each loop) x6 (36)
* Change to dark yellow yarn *
6 row: (5 dc, 2 dc in each loop) x6 (42)
* Change to a light green yarn *
7 row: (6 dc, 2 dc per EACH loop) x6 (48)
8 row: dc in each loop (48)
9 row: behind the back wall of the loop: (6 dc, 2 dc
together) x 6 (42)
10 row: (5 dc, 2 dc together) x6 (36)
Finish knitting. Fasten and cut the thread.
Unfortunately, there are no photos of the process. I just I realized that after the 10th row the watch is fastened mechanism. Most likely it should be ordinary board with arrows.
* Attach a dark green thread to the front loops of the 9th row *
11 row: sc in EACH loop (36)
Finish knitting. Cut the thread, leaving a long end for sewing.
Sew the dial to the front of the watch.
Glue the red buttons for 3, 6, 9 and 12 hours, pink and blue for the rest numbers.
ROOF (2 parts, red yarn):
* Dial 12 CH *
1 row: from the third loop from the hook: 2 dc in one loop, 9 dc, 2 dc in one loop, 9 dc (22)
2-31 rows: behind the back wall of the loop: dc in each loop (22)
Finish knitting. Fasten and cut the thread on one part, leave on the second long end for sewing.
Cut a base from cardboard equal to two lengths of one part. Bend the corner and insert into both parts. Stitch the details in the center.
TOP SHELF (red yarn):
* Dial 6 CH *
1 row: from the second loop from the hook: 2 dc in one loop, 3 dc, 2 dc in one loop, 3 dc (10)
2-38 rows: behind the back wall of the loop: dc in each loop (10)
Finish knitting. Insert the cardboard base. Pull the hole. Fasten the thread and crop.
SIDE WALLS (x2, red yarn):
* Dial 6 CH *
1 row: from the second loop from the hook: 2 dc in one loop, 3 dc, 2 dc in one loop, 3 dc (10)
2-38 rows: behind the back wall of the loop: dc in each loop (10)
Finish knitting. Insert the cardboard base. Pull the hole. Fasten the thread and crop.
Glue side walls, top shelf and roof.
LOWER SHELF (red yarn):
* Dial 12 CH *
1 row: from the third loop from the hook: 2 dc in one loop, 9 dc, 2 dc in one loop, 9 dc (22)
2-51 rows: behind the back wall of the loop: dc in each loop (22)
Finish knitting. Insert the cardboard base. Pull the hole. Fasten the thread and crop.
Glue the bottom shelf.
“GAZONCHIK” (light green yarn):
* Dial 33 CH *
1 row: from the second loop from the hook: dc to each loop (32)
Finish knitting. Fasten and cut the thread.
Glue the “lawn” over the bottom shelf.
WINDOWS (x2, start with black yarn):
* Dial 6 CH *
1-4 row: from the second loop from the hook: dc to each loop (5)
* Change to white yarn *
Tie a part in a circle dc.
Finish knitting. Fasten and cut the thread.
Embroider vertical and horizontal stripes with white thread.
Glue windows.
CUCKOO
HEAD AND BODY (blue yarn):
1 row: 6 dc into magic ring (6)
2 row: 2 dc in one loop x6 (12)
3 row: dc in each loop (12)
4 row: 2 dc together x6 (6)
5 row: 2 dc in one loop x6 (12)
6 row: (1 dc, 2 dc in one loop) x6 (18)
7 row: dc in EACH loop (18)
8 row: (1 dc, 2 dc together) x6 (12)
9 row: dc in EACH loop (12)
* Stuff detail *
10 row: 2 dc together x6 (6)
Finish knitting. Pull the hole. A thread fasten and trim.
WINGS (x2, blue yarn):
1 row: 3 dc into magic ring (3)
2 row: CH, turn, 2 dc in one loop x3, turn (6)
3 row: (3 CH, sl-st in the same loop from where the chain fits) x3
Finish knitting. Cut the thread, leaving a long end for sewing.
Sew on wings.
ANIMAL (white yarn):
1 row: 6 dc into magic ring (6)
Finish knitting. Cut the thread, leaving a long end for sewing.
Sew on the tummy.
Sew or glue the eyes. Make a key.
Glue the cuckoo on the top shelf.
BIG TREE (1 green, 1 dark green):
* Start with green yarn. 1-18 rows knit only on the back wall of the loop *
1 row: 3 dc into magic ring (3)
2 row: 2 dc in one loop x3 (6)
3 row: (1 dc, 2 dc in one loop) x3 (9)
4 row: (2 dc, 2 dc in one loop) x3 (12)
5-6 rows: dc per EACH loop (12)
7 row: (3 dc, 2 dc in one loop) x3 (15)
8-9 rows: dc per EACH loop (15)
10 row: (4 dc, 2 dc in one loop) x3 (18)
11-12 rows: dc per EACH loop (18)
13 row: (5 dc, 2 dc per EACH loop) x3 (21)
14-15 rows: dc per EACH loop (21)
16 row: (6 dc, 2 dc in one loop) x 3 (24)
17 row: dc in EACH loop (24)
18 row: (2 dc together, 2 dc) x6 (18)
19 row: (2 dc together, 1 dc) x6 (12)
* Start typing. Change to brown yarn *
20 row: 2 dc together x6 (6)
21-22 rows: dc per EACH loop (6)
23 row: (1 dc, 2 dc in one loop) x3 (9)
24 row: dc in each loop (9)
Finish knitting. Pull the hole. Fasten and cut the thread.
Attach a new thread for the front walls of the 17th row loops:
1 row: (4 CH, sl-st) in one loop, sl-st, [(sl-st, 4 CH, sl-st) in one loop, sl-st] to the end of the row.
Finish knitting. Fasten and cut the thread.
Sew or glue Christmas trees.
SMALL FIR-TREE (start with dark green yarn):
Just like a big Christmas tree, but skip rows 5, 7, 8, 13 and 14.
Sew or glue the tree.
DEER
HEAD (start with white yarn):
1 row: 3 dc into magic ring (3)
2 row: 2 dc in one loop x3 (6)
* Change to beige yarn *
3 row: dc in EACH loop (6)
4 row: (1 dc, 2 dc in one loop) x3 (9)
5 row: (2 dc, 2 dc in one loop) x3 (12)
6 row: dc in each loop (12)
7 row: (3 dc, 2 dc in one loop) x3 (15)
8 row: dc in each loop (15)
9 row: (2 dc together, 3 dc) x3 (12)
10 row: 2 dc together x6 (6)
Finish knitting. Pull the hole. A thread fasten and trim.
Sew or glue the eyes. Embroider the nose.
BODY (beige yarn):
1 row: 3 dc into magic ring (6)
2 row: 2 dc in one loop x 3 (6)
3 row: (1 dc, 2 dc in one loop) x3 (9)
4-5 rows: dc per EACH loop (9)
6 row: (2 dc, 2 dc in one loop) x3 (12)
7 row: (3 dc, 2 dc in one loop) x3 (15)
8 row: (4 dc, 2 dc in one loop) x3 (18)
9-11 rows: dc per EACH loop (18)
12 row: (2 dc together, 1 dc) x6 (12)
* Stuff detail *
13 row: 2 dc together x6 (6)
Finish knitting. Pull the hole. Fasten and cut the thread.
Embroider white spots on the back.
NECK (beige yarn):
1 row: 6 dc into magic ring (6)
2 row: behind the back wall of the loop: dc in each loop (6)
3 row: sl-st in EACH loop (6)
Finish knitting. Cut the thread, leaving a long end for sewing.
Sew head, neck and torso. Fill the neck with filler.
FRONT FEET (x2, beige yarn):
1 row: 5 dc into magic ring (5)
2-6 rows: dc per EACH loop (5)
Finish knitting. Cut the thread, leaving a long end for sewing.
HINDER FEET (x2, beige yarn):
1 row: 5 dc into magic ring (5)
2-5 rows: dc per EACH loop (5)
Finish knitting. Cut the thread, leaving a long end for sewing.
Sew legs to the body.
Glue the deer.
Amanita (x2, start with red yarn):
1 row: 6 dc into magic ring (6)
2 row: 2 dc in one loop x6 (12)
3 row: (3 dc, 2 dc in one loop) x3 (15)
4-5 rows: dc per EACH loop (15)
* Change to white yarn *
6 row: behind the back wall of the loop: (2 dc together, 3 dc) x3 (12)
7 row: 2 dc together x6 (6)
8-9 rows: dc per EACH loop (6)
10 row: (1 dc, 2 dc in one loop) x3 (9)
11 row: dc in EACH loop (9)
Stuff detail.
Finish knitting. Pull the hole. Fasten and cut the thread.
Embroider white spots on the hat.
Sew or glue fly agaric.
“CHAINS” (x2, green yarn):
Leave the long end of the thread at the beginning. Dial a chain of 70 CH for one “chain”, from 20 CH for the second “chain”.
Cut the thread, leaving a long end for sewing.
STRAWBERRY (x3)
BERRY (red yarn):
1 row: 3 dc into magic ring (3)
2 row: 2 dc in one loop x3 (6)
3 row: (1 dc, 2 dc in one loop) x3 (9)
4 row: (2 dc, 2 dc in one loop) x3 (12)
5 row: (3 dc, 2 dc in one loop) x3 (15)
6-9 rows: dc per EACH loop (15)
10 row: (2 dc together, 3 dc) x3 (12)
* Stuff detail *
11 row: 2 dc together x6 (6)
Finish knitting. Pull the hole. A thread fasten and trim.
Embroider “grains.”
SHEETS (light green yarn):
1 row: 6 dc into magic ring (6)
2 row: (sl-st, 4 CH, sl-st in the second loop from
hook, 2 dc) to the end of the row
Finish knitting. Cut the thread, leaving a long end for sewing.
Sew leaves to the berry.
Sew one strawberry to the short “chain”, the other two at different ends of the long
“Chains”.
Sew or stick chains to the watch.
FLOWERS (x4, start with yellow yarn):
1 row: 5 dc into magic ring (5)
* Change to white yarn *
2 row: (sl-st, 4 CH, sl-st) to the end of the row
Finish knitting. Fasten and cut the thread.
Glue flowers to the clock.
