Cute Little Santa Claus Amigurumi Free Pattern
Amigurumi little santa claus free pattern, you can find hundreds of free patterns related to amigurumi on our site.
Abbreviations
Mr = Magic ring
sc = single crochet
inc = Increase
dec = decrease
sl-st = slip-stitch
dc =double crochet
Please note that the legs
fit in different ways!
PATTERN
First leg:
Start in red.
1st row: 6sc into magic ring
2nd row: inc into magic ring waiting for the loop (12sc)
3rd row: (1sc, inc) * 6 (18sc)
Next, prepare the insoles. On the sheet
circle the outsole, cut, and
for this pattern of plastic
make round insoles for shoes.
(In this toy, insoles are used
sole sole only,
the toy is not worth it yourself, as
the cap outweighs. Therefore their
availability is optional).
4th row: behind the back wall of the 18sc loop
5-6 rows: 18sc (2 rows)
Insert the plastic insole inside.
7 row: 6dec, 6sc (12sc)
8 row: 12sc
Change the color to green:
9 row: (1sc, inc) * 6 (18sc)
10-11 rows: 18sc (2 rows)
Make slst. Finish knitting, thread
fasten and cut.
Second leg:
Start in red.
1st row: 6sc into magic ring
2nd row: inc into magic ring waiting for the loop (12sc)
3rd row: (1sc, inc) * 6 (18sc)
4th row: behind the back wall of the 18sc loop
5-6 rows: 18sc (2 rows)
Insert the plastic insole inside.
7 row: 6sc, 6dec (12sc)
8 row: 12sc
Change the color to green:
9 row: (1sc, inc) * 6 (18sc)
10-11 rows: 18sc (2 rows)
On the second leg, knit another 20sc,
but do not cut the thread, but continue
knit the body. Put your legs close
check that the decavings are exactly
in front.
12 row: attach the second leg to
the first leg where they finished knitting
(into the loop following the slst), knit
18sc for the first part, then 18sc for
second part (36sc)
In this place you need to install
marker (marker is in front).
13 row: (5sc, inc) * 6 (42sc)
14-19 rows: 42sc (6 rows)
20 row: (5sc, dec) * 6 (36sc)
21-22 rows: 36sc (2 rows)
23 row: 2sc, dec, (4sc, dec) * 5, 2sc (30sc)
24-25 rows: 30sc (2 rows)
At this stage, you need to transfer the marker, for this, knit another 8sc
(or other necessary amount) so that it is exactly on the side, and change
color on white. Now here will be the beginning of the series.
26 row: behind the rear wall of the 30sc loop
27 row: 30sc
28 row: (3sc, dec) * 6 (24sc)
29-30 rows: 24sc (2 rows)
31 row: 1sc, dec, (2sc, dec) * 5, 1 sc (18sc)
Change the color to beige:
32 row: 18sc
33 row: inc into magic ring each loop (36sc)
34 row: (5sc, inc) * 6 (42sc)
35 row: 3sc, inc, (6sc, inc) * 5, 3sc (48sc)
36-44 rows: 48sc (9 rows)
45 row: 3sc, dec, (6sc, dec) * 5, 3sc (42sc)
46 row: (5sc, dec) * 6 (36sc)
47 row: 2sc, dec, (4sc, dec) * 5, 2sc (30sc)
48 row: (3sc, dec) * 6 (24sc)
49 row: 1sc, dec, (2sc, dec) * 5, 1sc (18sc)
50 row: (1sc, dec) * 6 (12sc)
Fasten and cut the thread, leaving a long tip with which
tighten the remaining hole.
Hide the tail of the thread inside the head.
Spout:
Tie in beige, lightly fill:
1st row: 6sc into magic ring
2 row: inc into magic ring each loop (12sc)
3rd row: 6 dec (6sc)
Fasten the thread, cut, leaving a long end for sewing.
Pens:
Tie the two pieces together, knit in a knitting process. Fill tightly only
lower part, then fill medium, the upper part does not need to be filled.
Start in red:
1st row: 6sc into magic ring
2 row: inc into magic ring each loop (12sc)
3-5 rows: 12sc (3 rows)
6 row: (4sc, dec) * 2 (10sc)
Change the color to white:
7-11 rows: 10sc (5 rows)
12 row: (3sc, dec) * 2 (8sc)
13-15 rows: 8sc (3 rows)
Fold the edges of the part together, knit
4sc. Fasten the thread, cut, leaving
long end for sewing.
Design and assembly:
Sew the handles symmetrically on the sides,
previously securing them with pins.
Sew eyelets between 39 and 40
(the distance between them is 2
sc), embroider the eyebrows with the same thread.
Sew a nose under the eyes.
Next, make a beard. For this from
Alize Softy Yarn Cook 19
lengths of 12cm. Fasten them with
using the hook on row 38 (see
a photo). I got 7 pcs with
both sides of the nose and 5 pcs under the nose
(for density you can add another row
below). Trim your beard.
Cap:
In white, dial a chain of 44 ch and use slst to close it in a circle.
1 row: 2 ch lift, 44DC, slst (44dc)
2 row: 1 ch lift, 44sc, slst (44sc)
Change the color to red.
Further, each row of the cap begins with a 2 ch rise and ends with a slst.
3rd row: behind the front wall of the 44DC loop
4-5 rows: 44DC (2 rows)
6 row: (20DC, dec) * 2 (42dc)
7 row: 10 DC, dec, 19DC, dec, 9DC (40dc)
8 row: (18DC, dec) * 2 (38dc)
9 row: 9DC, dec, 17DC, dec, 8DC (36dc)
10 row: (16DC, dec) * 2 (34dc)
11 row: 8DC, dec, 15DC, dec, 7DC (32dc)
12 row: (14DC, dec) * 2 (30dc)
13 Series: 7DC, dec, 13DC, dec, 6DC (28dc)
14 row: (12DC, dec) * 2 (26dc)
15 row: 6DC, dec, 11DC, dec, 5DC (24dc)
16 row: (10DC, dec) * 2 (22dc)
17 row: 5DC, dec, 9DC, dec, 4DC (20dc)
18 row: (8DC, dec) * 2 (18dc)
19 row: 4DC, dec, 7DC, dec, 3DC (16dc)
20 row: (6DC, dec) * 2 (14dc)
21 row: 3DC, dec, 5DC, dec, 2DC (12dc)
22 row: (4DC, dec) * 2 (10dc)
Amigurumi23 row: 2
