Doberman Dog Amigurumi Free Crochet Pattern

I am sharing free amigurumi animal patterns for you. In this article I share with you the amigurumi dog pattern.

Materials and tools:

1. The main yarn of two colors: black (approx. 60 g) and brown (approx. 15 g) (I used yarn Svetlana of the Semenov factory. Structure: 50% acrylic, 50% wool. The length of a thread is 250m. Weight of a skein is 100 g)
2. A pink yarn for the tongue (I used Kartopu Amigurumi. Structure: 51% acrylic, 49% cotton. The length of a thread is 130 m. weight of a skein is 50 g)
3. Baking polymer clay of black and white colors for the eyes and nose and a glossy varnish for a clay.
4. A copper wire 1,5 mm in diameter (approx. 2,5 m);
5. A wire for beading (approx. 1m);
6. The hook № 1,25 Clover, or any other hook suitable in size to the chosen yarn.
7. Stuffing.
8. An adhesive plaster on a fabric base 1 cm wide.
9. A long needle with a big eye for tightenings.
10. A strong thread for tightenings.

Abbreviations

ch = chain

inc = increase (2sc in 1 stitch)

dec = decrease (crochet 2 sc together)

sc = single crochet

hdc = half double crochet

dc = double crochet

sl st = slip stitch

This crochet pattern does not contain crocheting lessons, it suits for the people who can crocheting.

Front legs (2 pcs)

The legs are crocheted similarly, without any difference for left and right.

You can not align the marker.

Begin crocheting with a brown color

1 rnd: 6sc in the magic ring = 6st

2 rnd: 6inc = 12st

3 rnd: (3sc, 1inc) х 3 = 15st

4-6 rnd: 15sc = 15st (3rows)

7 rnd:(2sc, 1dec) х 3, 3sc = 12st

Cut a piece of wire approx. 20 cm long.

Make a loop at one end and wind it with an adhesive plaster. Insert a wire in the leg and stuff it a little. Further continue crocheting around a wire.

8 rnd: (2sc, 1dec) х 3 = 9st

9 rnd: 1dec, 7sc = 8 st

10-16 rnd: 8sc = 8st (7rows)

Change the color to black

17-19 rnd: 8sc = 8st (3rows)

Further we will crochet a joint.

20 rnd: 3inc hdc, 5sc = 11st

21 rnd: 11sc = 11st

22 rnd: 3dec, 5sc = 8st

Stuff a joint rather tight

23-24 rnd: 8sc = 8st (2rows)

25 rnd: 1inc, 7sc = 9st

26 rnd: (2sc, 1inc) х 3 = 12st

27 rnd: 12sc = 12st

28 rnd: (3sc, 1inc) х 3 =15st

29-31 rnd: 15sc = 15st (3rows), fasten off and cut the yarn.

Stuff the upper part of the leg just a little to underline its shape

Hindlegs (2 pcs)

The legs are crocheted similarly, without any difference for left and right.

You can not align the marker.

Begin crocheting with brown color

1 rnd: 6sc in the magic ring = 6st

2 rnd: 6inc = 12st

3 rnd: (3sc, 1inc) х 3 = 15st

4 rnd: 15sc = 15st

5 rnd: 13sc, 1dec = 14st

6 rnd: 14sc = 14st

7 rnd: 12sc, 1dec = 13st

8 rnd: 13sc = 13st

9 rnd: 11sc, 1dec = 12st

Cut a piece of wire approx. 40 cm long. Make a loop at one end and wind it with an adhesive plaster. Insert a wire in the leg and stuff it. Further continue crocheting around a wire.

10 rnd: 10sc, 1dec = 11st

11 rnd: 9sc, 1dec = 10st

12 rnd: 8sc, 1dec = 9st

Change the color to black

13-16 rnd: 9sc = 9st (4rows)

Further we will crochet a joint.

17 rnd: 3inc hdc, 6sc = 12st

18 rnd: 12sc = 12st

19 rnd: 3dec, 6sc = 9st

Stuff a joint rather tight

20-24 rnd: 9sc = 9st (5rows)

25 rnd: (2sc, inc) х 3 = 12st

26 rnd: (3sc, inc) х 3 = 15st

27 rnd: (4sc, inc) х 3 = 18st

28 rnd: (5sc, inc) х 3 = 21st

29-33 rnd: 21sc = 21st (5rows), fasten off and cut the yarn

Mark the 10th stitch from the marker, we begin crocheting in this leg in the body from this stitch

Body.

Begin crocheting from the tail.

The marker goes along the middle of the belly.

Begin crocheting with a black color.

1 rnd: 5sc in the magic ring = 5st

2 – 3 rnd: 5sc = 5st (2rows)

4 rnd: 4sc, inc = 6st

5 rnd: 6sc = 6st

6 rnd: 5sc, 1inc = 7st

7 rnd: 7sc = 7st

Take a piece of wire 30 cm long, wind one end with an adhesive plaster, insert it in the tail.

8 rnd: 6sc, 1inc = 8st

9 rnd: 8sc = 8st

10 rnd: 7sc, 1inc = 9st

11 – 12 rnd: 9sc = 9 st (2rows)

For not mixed tail crochet 8 more rows, 9 sc in each row

13 rnd: 9inc = 18st

14 rnd: (2sc, 1inc) х 6 = 24st

15 rnd: (3sc, 1inc) х 6 = 30st

16 rnd: (4sc, 1inc) х 6 = 36st

17 rnd: (5sc, 1inc) х 6 = 42st

In the next row crochet in the hindlegs, to do this put the details by the right side to each other and beginning from the 10th stitch from the marker crochet the details grasping two edges (simultaneously grasping the stitches of the body and the stitches of the leg).

18 rnd: 1sc, 10sc for the both edges, grasping the stitches of the body and the stitches of the right hindleg, 20sc, 10sc for the both edges, grasping the stitches of the body and the stitches of the left hindleg, 1sc = 42st

Twist the wires of the tail and the legs together and wind with an adhesive plaster.

19 rnd: 1sc – along the body, 10sc – along the outer side of the leg, 1dec (1 sc of the leg and 1 sc of the back), 18sc – along the back, 1dec (1 sc of the back and 1 sc of the leg), 9sc – along the outer side of the leg, 1 dec = 41st

Further it is necessary to align the marker, if necessary crochet shift stitches.

20 rnd: 1dec, 39sc = 40st

21 rnd: 40sc = 40st

Stuff the upper part of the leg. Further stuff the body rather tight in the course of crocheting.

22 rnd: (1dec, 1sc) х 3, 22sc, (1sc, 1dec) х 3 = 34st

23 rnd: 34sc = 34st

24 rnd: (1dec, 1sc) х 2, 22sc, (1sc, 1dec) х 2 = 30st

25 rnd: 30sc = 30st

26 rnd: (1sc, 1inc) х 3, 18sc, (1inc, 1sc) х 3 = 36st

27 rnd: 2inc, 32sc, 2inc = 40st

28 – 29 rnd: 40sc = 40st (2rows)

30 rnd: (1sc, 1inc) х 3, 28sc, (1inc, 1sc) х 3 = 46st

31 rnd: 46sc = 46st

32 rnd: (1sc, 1inc) х 3, 34sc, (1inc, 1sc) х 3 = 52st

33 – 37 rnd: 52sc = 52st (5rows)

In the next row we will crochet in the front legs. Put the leg by the right side to the body by the toes forward. Crochet in the legs, right one – beginning from the last crocheted stitch, left one – from the 8 th stitch from the marker.

38 rnd: (1sc, 1dec) х 2, 8sc for the both edges, grasping the stitches of the body and the stitches of the right front leg, 24sc, 8sc for the both edges, grasping the stitches of the body and the stitches of the left front leg, (1dec, 1sc) х 2 = 46st

39 rnd: 4sc along the breast, 7sc along the outer side of the leg, 24sc along the back, 7sc along the outer side of the leg, 4sc along the breast = 46st

Twist wires of the front legs with wire of the body together and wind with an adhesive plaster.

40 rnd: (1sc, 1dec) х 2, 3sc, 1dec, 22sc, 1dec, 3sc, (1dec, 1sc) х 2 = 38st

41 rnd: 7sc, 1dec, 20sc, 1dec, 7sc = 36st

42 rnd: 12sc, 8 ch, skip 12 sc, 12sc = 32st

Take out a wire in the received opening.

43 rnd: 8sc, 2dec, 8sc along the chain, 2dec, 8sc = 28st

44 rnd: (2sc, 1dec) х 7= 21st

45 rnd: (1sc, 1dec) х 7 = 14st

46 rnd: 7dec = 7st

Tighten the opening. Fasten off and cut the yarn

Neck.

Crochet 22 sc round a wire beginning from the middle of the breast. The marker goes along the middle of the neck at the front part.

Crochet with a black color.

1 rnd: 4sc along the chain, inc, 10sc, inc, 4sc along the chain

2 – 4 rnd: 22sc = 22st (3rows)

5 rnd: 4sc, 1dec, 10sc, 1dec, 4sc = 20st

6– 8 rnd: 20sc = 20st (3rows)

9 rnd: 4sc, 1dec, 8sc, 1dec, 4sc = 18st

10-12 rnd: 18sc = 18st (3rows)

13 rnd: (2sc, 1inc) х 6 = 24st

Fasten off and cut the yarn. Stuff the neck.

Tongue

Crochet with a pink color.

Crochet 15 ch. Crochet along the both sides of the chain.

1 rnd: 7sc, 4hdc, 2dc, 4dc in 1 st, 2dc, 4hdc, 7sc = 30st

2 rnd: 8sc, 5hdc, 4inc hdc, 5hdc, 8sc = 34st

In the course of crocheting of the next row it is necessary to insert a wire for beading between the rows

3 rnd: 13sc, (1sc, inc) х 4, 13sc = 38st

Lower lip

Crochet with a black color.

You can not align the marker.

1 rnd: 6sc in the magic ring = 6st

2 rnd: (1sc, 1inc) х 3 = 9st

3 rnd: 2inc, 2sc, 2inc, 3sc = 13st

4 – 11 rnd: 13sc = 13st (8rows)

Fasten off and cut the yarn. Do not stuff the detail.

Head

The marker goes along the middle of the upper part of the head. It is necessary to align the marker, if necessary crocheting shift stitches.

Begin crocheting with a brown color. We will crochet a black stripe from above the muzzle. The stitches which you should crochet with a black color will be marked in the text by a bold type.

Begin with a brown color.

1 rnd: 6sc in the magic ring = 6st

2 rnd: 1inc х 5, inc = 12st

3 rnd: inc, (1sc, inc) х 4, inc, 2sc = 18st

4 rnd: 2 sc, 2 inc, (1sc, 1inc) х 2, 2sc, (1inc, 1sc) х 2, 2inc, 2sc = 26st

5 rnd: 2sc, 5sc, 4inc, 4sc, 4inc, 5sc, 2sc = 34st

6 rnd: 2sc, inc, 5sc, (1inc, 1sc) х 4, 2sc, (1sc, 1inc) х 4, 5sc, inc, 2sc = 44st

7 rnd: 2 sc, 11sc, (1sc, 1inc) х 4, 2sc, (1inc, 1sc) х 4, 11sc, 2sc = 52st

8 rnd: 2sc, 1inc, 46sc, 1inc, 2sc = 54st

9 rnd: 2sc, 16sc, 1dec, 14sc, 1dec, 16sc, 2sc = 52st

10 rnd: 2sc, 16sc, 1dec, 12sc, 1dec, 16sc, 2sc = 50st

11 rnd: 2sc, 22sc, dec, 22sc, 2sc = 49st

12 rnd: 3sc, 13sc, 1dec, 13sc, 1dec, 13sc, 3sc = 47st

13 rnd: 3sc, 12sc, 1dec, 13sc, 1dec, 12sc, 3sc = 45st

In the next row we will crochet in the lower lip – put the details by the right side to each other

14 rnd: 3 sc, 11sc, 2dec, 2sc, 5sc for the both edges, grasping the stitches of the head and the stitches of the lower lip, 2sc, 2dec, 11sc, 3sc = 41st

15 rnd: 3sc, 10sc, 2dec, 1sc – along the head, 8sc along not crocheted stitches of the lower lip, 1sc, 2dec, 10sc, 3sc – along the head = 40st

16 rnd: 3inc, 9sc, 2dec, 8sc, 2dec, 9sc, 3inc = 42st

Change the color to black, fasten off and cut the brown yarn

17 rnd: (1sc, 1inc) х 3, 30sc, (1inc, 1sc) х 3 = 48st

18 rnd: (2sc, 1inc) х 3, 10sc, (1sc, 1inc) х 5, 10sc, (1inc, 2sc) х 3 = 59st

19 rnd: 59sc = 59st

20 rnd: (3sc, 1inc) х 3, 35sc, (1inc, 3sc) х 3 = 65st

21- 22 rnd: 65sc = 65st (2rows)

23 rnd: 7sc, 13sc for the front loops only, 25sc, 13sc for the front loops only, 7sc = 65st

24 – 25 rnd: 65sc = 65st (2rows)

26 rnd: 7sc, 13sc together with the back loops of the 22 rnd, 11sc, 3 ch, skip 3 stitches, 11sc, 13sc together with the back loops of the 22 rnd, 7sc = 65st – we will insert a wire in the received opening

27 – 30 rnd: 65sc = 65st (4rows)

30 rnd: (9sc, dec) х 5, 10sc = 60st

31 rnd: 4sc, dec, (8sc, dec) х 5, 4sc = 54st

32 rnd: (7sc, dec) х 6 = 48st

33 rnd: 3sc, dec, (6sc, dec) х 5, 3sc = 42st

34 rnd: (5sc, dec) х 6 = 36st

First decorate the lower lip. To do this cut a piece of wire, bend in the shape of the lip and insert in the lower lip. Sew the lip along its contour by invisible stitches to fix a wire inside. fasten with several stitches the cheeks (the dangling parts of the muzzle), so as later you can not put the stuffing inside them. The stitches should be placed there, where at the photo you can see a yellow stripe.

Sew the tongue in the place where the head is connected with the lower lip.

Stuff the nose rather tight. Insert a wire from the neck in the head through the opening of 3 ch. Connect a wire of the lower jaw with a wire of the neck, wind with an adhesive plaster. Sew the head to the neck.

Crochet the head to the end, stuffing it in the course of crocheting.

35 rnd: 2sc, dec, (4sc, dec) х 5, 2 sc = 30st

36 rnd: (3sc, dec) х 6 = 24st

37 rnd: (2sc, 1dec) х 6 = 18st

38 rnd: (1sc, 1dec) х 6 = 12st

39 rnd: 6dec = 6st

Tighten the left stitches.

Ear (mixed) 2 pcs.

2ch,

1 rnd: 1sc, ch, turn

2 rnd: inc, ch, turn

3 rnd: 2sc, ch, turn

4 rnd: inc, 1sc, ch, turn

5 rnd: 3sc, ch, turn

6 rnd: inc, 2sc, ch, turn

7 rnd: 4sc, ch, turn

8 rnd: inc, 3sc, ch, turn

9 rnd: 5sc, ch, turn

10 rnd: inc, 4sc, ch, turn

11 rnd: 6sc, ch, turn

12 rnd: inc, 5sc, ch, turn

13 rnd: 7sc, ch, turn

14 rnd: inc, 6sc, ch, turn

15 rnd: 7sc, inc, ch, turn

16 rnd: inc, 8sc, ch, turn

17 rnd: 9sc, inc, ch, turn

18 rnd: inc, 10sc, ch, turn

19 rnd: 11sc, inc, ch, turn

20 rnd: inc, 12sc, ch, turn

21 rnd: 12sc, 2inc, ch, turn

22 rnd: inc, 15sc, ch, turn

23 rnd: 16sc, inc, ch, turn

24 rnd: inc, 12sc, sl st, ch, turn

25 rnd: skip 1st, 14sc, ch, turn

26 rnd: 10sc, sl st, ch, turn

27 rnd: skip 1st, 10sc, ch, turn

28 rnd: 7sc, sl st, ch, turn

29 rnd: skip 1st, 7sc

Crochet along the whole edge of the ear inserting a wire between the rows.

ch, 28sc, 1sc, 2ch, 1sc in the top of the ear, along the other side of the ear 23sc, ch, along the bottom of the ear 20sc.

Natural ear (2 pcs)

5ch,

1 rnd: 4sc, ch, turn

2 rnd: inc, 3sc, ch, turn

3 rnd: inc, 4sc, ch, turn

4 rnd: inc, 5sc, ch, turn

5 rnd: inc, 6sc, ch, turn

6 rnd: inc, 7sc, ch, turn

7 rnd: inc, 8sc, ch, turn

8 rnd: inc, 9sc, ch, turn

9 rnd: inc, 10sc, ch, turn

10 rnd: inc, 10sc, inc, ch, turn

11 rnd: 14sc, ch, turn

12 rnd: inc, 12sc, inc, ch, turn

13 rnd: inc, 14sc, inc, ch, turn

14 – 17 rnd: 18sc, ch, turn

18 rnd: dec, 16sc, ch, turn

19 rnd: dec, 15sc, ch, turn

20-25 rnd: 16sc, ch, turn

Crochet round the ear with sc inserting a wire for beading between the rows.

Tightening of the eye-sockets.
Mark 2 points in the middle of the eye-sockets at the both sides of the nose bridge (in total there are 4 points). Make the tightenings – right-left upper points, then left-right lower points. Repeat 2-3 times, you should get the nose bridge. Fasten off and cut a thread.

Sewing of the ears
The ears should be sewn for two rows upper than a fold, approx. in the area of the 28th row. The edges of the ears are placed along the edges of a fold.

It is necessary to tighten the toes on the legs

Making the eyes and nose
For the eyes I use a polymer clay Sonnet (you can use any you like) of white and black colors.

For the eyes
Cut a piece of white polymer clay and make a ball approx. 1.5 cm in diameter.

Cut it in half with a penknife, slightly smooth a semicircle so as it will be not very prominent. Mark the places for the eyes with a dots. I make two balls 0.3 mm in diameter from a black polymer clay and insert them in the marked places, slightly smooth the pupils so as they will not be upper than the eyes themselves

For the nose
Cut a piece of black polymer clay, make a ball 1.5 cm in diameter. You should give to a ball a shape of the nose. Make a small groove in the middle with a riding-crop not reaching the top approx. for a half. Make two cavities for the nostrils with a dots. And from the nostrils make the grooves with a riding-crop till the bottom of the nose. You can make the top of the nose textured with a dots.

It is necessary to bake in an oven with a temperature 130 degrees for 30 minutes. After the nose completely dries it is necessary to cover it with a glossy varnish for a polymer clay. I use a varnish Sonnet for polymer clay.

Then glue the eyes and nose, put on a collar and your Doberman is ready!!!