Yellow Cute Teddy Bear Amigurumi Free Pattern

All amigurumi free patterns and tutorials. A nice share for those looking for Amigurumi teddy bear free pattern. 

LIST OF MATERIALS REQUIRED 

1. Himalaya Dolphin FINE yarn of your favorite shade. 

2. Yarn Alize Softy light shade for the muzzle (in two additions). 

3. Strong thread in tone of the main (for thread fastening), and also white and brown thread for the design of the muzzle (I have this is YarnArt Jeans). 

4. Hook number 3. 

5. Filler (holofiber, syntepuh). 

6. Eyes 10 mm on a secure mount. 

7. Nozzle No. 15 on a secure mount (optional) 

8. A long needle with a large eye for tightening and thread fastening. 

9. Needle for stitching toy parts. 

10. Scissors. 

When using these materials and medium density knitting toy turns out to be about 23 cm tall. 

ATTENTION! 

If you knit from Himalaya Dolphin BABY yarn or the like, for muzzle use Alize Softy Plus in one addition – so the muzzle is more harmonious. Yarn Himalaya Dolphin FINE, which I knit is much thinner than the usual “bun”. From Himalaya Dolphin BABY when using hook No. 4 and medium density knitting bear turned out to be about 33 cm. 

ABBREVATİONS 

SC – single crochet 

inc – increase (2 SC in one loop) 

dec – decrease (2 SC together) 

CH – chain 

HDC – half double crochet 

incHDC – inc of half double crochet (2 half crochets with single crochet) 

HEAD 

Start Knitting Alize Softy in Two addition (if you do not have two hanks of one colors, you can use one by pulling the second end of the thread from the middle of the hank). 

1 row: 6 SC into Magic ring (6) 

2 row: inc * 6 times (12) 

3 row: 2 SC, (3 SC in one loop) * 2 times, 4 SC, 

(3 SC in one loop) * 2 times, 2 SC (20) 

4 row: 4 SC, 3 inc, 7 SC, 3 inc, 3 SC (26) 

5-6 row: 26 SC (26) 

Change the color to primary. 

7 row: 10 SC, 7 incHDC, 9 SC (33) 

8 row: inc, 7 SC, inc, 1 SC, 2 HDC, (incHDC, 

HDC) * 6 times, 1 HDC, 1 SC, inc, 6 SC (42) 

9 row: 1 SC, inc, 7 SC, inc, 7 SC, inc, 4 SC, inc, 4 

SC, inc, 8 SC, inc, 5 SC (48) 

10 row: 15 SC, (inc, 6 SC) * 4 times, 5 SC (52) 

11 row: 22 SC, inc, 10 SC, inc, 18 SC (54) 

12 row: 27 SC, inc, 2 SC, inc, 23 SC (56) 

Insert safety eyes between semi-columns of 7 rows (at the beginning and at the end increases from half columns). 

To the base of the spout (if you use spout on secure mount) attach brown thread (with the help of it you will later embroider the face). Insert the nose in the center muzzle between 3 and 4 rows. 

13-21 rows (9 rows): 56 SC (56) 

22 row: (12 SC, dec) * 4 times (52) 

23 row: 5 SC, dec, (11 SC, dec) * 3 times, 6 SC (48) 

24 row: (10, dec) * 4 times (44) 

25 row: 4 SC, dec, (9 SC, dec) * 3 times, 5 SC (40) 

26 row: (8 SC, dec) * 4 times (36) 

Start filling your head. It needs to be done tight enough pushing the filler from the center to the walls, again adding it to center. 

27 row: 1 SC, dec, (4 SC, dec) * 5 times, 3 SC (30) 

28 row: (3 SC, dec) * 6 times (24) 

29 row: (2 SC, dec) * 6 times (18) 

30 row: (1 SC, dec) * 6 times (12) 

31 row: dec * 6 times (6) 

Pull the hole. Hide the thread. 

BODY 

1 row: 6 SC into Magic ring (6) 

2 row: inc * 6 times (12) 

3 row: (1 SC, inc) * 6 times (18) 

4 row: (2 SC, inc) * 6 times (24) 

5 row: (3 SC, inc) * 6 times (30) 

6 row: 1 SC, inc, (4 SC, inc) * 5 times, 3 SC (36) 

7 row: (5 SC, inc) * 6 times (42) 

8 row: 2 SC, inc, (6 SC, inc) * 5 times, 4 SC (48) 

9-16 row (8 rows): 48 SC (48) 

17 row: 11 SC, dec, (6 SC, dec) * 3 times, 11 SC (44) 

18 row: 7 SC, dec, (5 SC, dec) * 4 times, 7 SC (39) 

19 row: 2 SC, dec, 12 SC, dec, 4 SC, dec, 11 SC, dec, 2 SC (35) 

20 row: 9 SC, dec, 13 SC, dec, 9 SC (33) 

21 row: 33 SC (33) 

Start stuffing your torso. 

22 row: 11 SC, dec, (3 SC, dec) * 2 times, 10 SC (30) 

23 row: 30 SC (30) 

24 row: 4 SC, dec, 19 SC, dec, 3 SC (28) 

25 row: 28 SC (28) 

26 row: 11 SC, dec, 4 SC, dec, 9 SC (26) 

27 row: dec, 11 SC, dec, 11 SC (24) 

28 row: (4 SC, dec) * 4 times (20) 

29 row: 20 sc (20) 

Fill your body to the end. Cut the thread leave a long end for sewing. 

LEGS (2 parts) 

Dial 7 CH, knit from the second loop from hook: 

1 row: inc, 4 SC, 4 SC in one loop, 4 SC, inc (6) 

2 row: inc, 5 SC, 3 SC in one loop, 2 SC, 3 SC single loop, 5 SC, inc (22) 

3 row: 3 SC in one loop, 7 SC, 3 SC in one loop, 4 SC, 3 SC in one loop, 8 SC (28) 

4-5 row: 28 SC (28) 

6 row: dec, 26 SC (27) 

7 row: 8 SC, 6 dec, 7 SC (21) 

8 row: 7 SC, 4 dec, 6 SC (17) 

9 row: 7 SC, 2 dec, 6 SC (15) 

10 row: 7 SC, dec, 6 SC (14) 

Start stuffing the leg. 

11-17 row: 14 SC (14) 

18 row: 3 SC, 2 dec, 7 SC (12) 

Fill the leg to the end. 

19 row: dec * 6 times (6) 

Pull the hole. Cut and hide the thread. 

PENS 

Stuff the details during the knitting process. 

left: 

1 row: 6 SC into Magic ring (6) 

2 row: ((3 SC in one loop) * 2 times, 1 SC) * 2 times (14) 

3 row: 2 SC, inc, 6 SC, inc, 4 SC (16) 

4-5 row: 16 SC (16) 

6 row: 3 SC, inc, 6 SC, 2 dec, 2 SC (15) 

7 row: 4 SC, inc, 6 SC, dec, 2 SC (15) 

8 row: 11 SC, dec, 2 SC (14) SC 

9 row: 14 SC (14) 

10 row: 11 SC, dec, 1 SC (13) 

11 row: 13 SC (13) 

12 row: 11 SC, dec (12) 

13-17 row (5 rows): 12 SC (12) 

18 row: dec, 3 SC, dec, 5 SC (10) 

Fill the handle to the end. 

19 row: dec * 5 times (5) 

Pull the hole. Cut and hide the thread. 

right: 

1 row: 6 SC into Magic ring (6) 

2 row: ((3 SC in one loop) * 2 times, 1 SC) * 2 times (14) 

3 row: 2 SC, inc, 6 SC, inc, 4 SC (16) 

4-5 row: 16 SC (16) 

6 row: 2 SC, 2 dec, 6 SC, inc, 3 SC (15) 

7 row: 2 SC, dec, 6 SC, inc, 4 SC (15) 

8 row: 2 SC, dec, 11 SC (14) 

9 row: 14 SC (14) 

10 row: 1 SC, dec, 11 SC (13) 

11 row: 13 SC (13) 

12 row: 1 SC, dec, 10 SC (12) 

13-17 row: 12 SC (12) 

18 row: 1 SC, dec, 5 SC, dec, 2 SC (10) 

Fill the handle to the end. 

19 row: dec * 5 times (5) 

Pull the hole. Cut and hide the thread. 

EARS 

1 row: 6 SC into Magic ring (6) 

2 row: inc * 6 times (12) 

3-5 row (3 rows): 12 SC (12) 

Do not stuff your ears. Fold the top edges together and knit 5 SC. 

TAIL 

1 row: 6 SC into Magic ring (6) 

2 row: inc * 6 times (12) 

3 row: dec * 6 times (6) 

Do not stuff the tail. 

ASSEMBLY AND DECORATION 

So, all the details are connected, now our bear an expressive face and collect it) 

Muzzle must be pulled – this is a guarantee attractiveness of the teddy bear)) And it’s not at all difficult) 

Mark on the face the points through which you will make the weight (this is enough to be done visually): 2 points near each eye and 2 points below the muzzle, in the region of 6-7 rows (the distance between nearby points – 1 SC). 

Take a long needle and a sturdy white thread. Tighten the thread tight enough. 

Enter the needle at point D, output to point B (leave one end of the thread sticking out of point E). From point B insert the needle at point A and output to point B. From point B, enter the needle at point G and deduce from point E. Then enter again at point D and repeat tightening another 1-2 times. 

We made the muzzle of the muzzle, the thread is withdrawn from point E. Now it is necessary to tighten eyes between themselves. Enter the needle at point D, output from point B, enter to point A, withdraw from point B, then to point G, output at point B. Repeat again (A-B-D), tighten thread, withdraw it from point E, tie it to the second end and hide it. 

The hitch is ready! 

The thread you tied to embroider the muzzle and if also allows the length of the edge. White thread color embroider “whites” of the eyes. 

Now look at the difference below – the muzzle is decorated on the right, on the left – no)) 

Sew the ears between 15 and 16 side by side at a distance of 13-14 SC. 

Next, sew the head to the torso. I sew it straight plush thread, which I knit a toy (I sew the ears as well). 

To prevent the head from hanging when sewing, fasten it to body with the help of two or three knitting needles. 

Sew the tail from the back between the 7th and 10th rows of the trunk. 

Fasten handles and legs with the help of a thread fastener. Legs in an area of 8-9 rows of the body, arms – 25-26 rows.