Amigurumi Angel Doll Free Crochet Pattern

We continue to bring together the most beautiful amigurumi patterns related to Amigurumi. In this article you are waiting for a of amigurumi angel doll pattern.

ABBREVIATIONS:

•Mr: Magic ring,

• sc: single crochet,

•İnc: increase,

•DEC  decrease,

• x: repeat.

•BLO: Back Loop only,

•FLO: Front Loop only,

•DC: Double crochet.

Materials:

• Yarn YarnArt Jeans (160 m, 50 gr) or any other

 white (100 gr)

 beige (30 gr)

 yellow (10 gr)

• Hook number 2 or under your yarn

• Safe eyes 10 mm

• White felt (circles with a diameter of 20 mm)

• Filler

• Scissors, stitching needle, glue

• Wire about 40 cm

• Pastel (optional), if you will tint your cheeks

The size of the finished toy is 25 cm (when using

similar threads)

Eye pattern

Cut a hole and insert safe eyes as shown in

photo above.

Legs

We start knitting with beige yarn.

We dial 6 ch

1 row: from the 2nd loop from the hook 4 sc, 3 sc in one loop, 3 sc, inc (12)

2 row: inc, 3 sc, 3 inc, 3 sc, 2 inc (18)

3 row: 1 sc, inc, 4 sc, inc, (1 sc, inc) * 2, 4 sc, inc, 1 sc, inc (24)

4-5 row: 24 sc

6 row: 4 sc, 7 dec, 6 sc (17)

7 row: 1 sc, dec, 1 sc, 4 dec, 1 sc, dec, 2 sc (11)

8 row: 11 sc

9 row: 10 sc, inc (12)

10 row: 12 sc

11 row: (inc, 2 sc) * 4 (16)

Change the yarn to white.

12-13 row: 16 sc

14 row: 1 sc, inc, (3 sc, inc) * 3, 2 sc (20)

15 row: 5 sc, sl-st

Fasten, cut the thread and hide.

We knit the left leg in the same way to the 14th row, only we don’t cut the thread, but

continue to knit the body.

Body

15 row: continue to knit on the left leg 15 sc, 3 ch, attach

sc in the sl-st of the right foot, 19 sc on the right, 3 sc on the air chain, 5

sc left (46)

16 row: 15 sc, 3 sc over the air chain, 28 sc (46)

We begin to gradually fill the legs. In the process of knitting, we stuff

and body.

17 row: (4 sc, inc) * 9, 1 sc (55)

18 row: 55 sc

19 row: (10 sc, inc) * 5 (60)

20 row: 60 sc

21 row: (9 sc, inc) * 6 (66)

22-26 row: 66 sc (5 rows)

We begin to make decreases on the sides.

27 row: 7 sc, dec, 31 sc, dec, 24 sc (64)

28 row: 64 sc

29 row: 7 sc, dec, 30 sc, dec, 23 sc (62)

30 row: 62 sc

31 row: 6 sc, dec, 29 sc, dec, 23 sc (60)

32 row: 60 sc

33 row: 6 sc, dec, 28 sc, dec, 22 sc (58)

34 row: 6 sc, dec, 27 sc, dec, 21 sc (56)

35 row: 6 sc, dec, 26 sc, dec, 20 sc (54)

36 row: (7 sc, dec) * 6 (48)

37 row: 48 sc

38 row: (6 sc, dec) * 6 (42)

39-40 row: 42 sc

41 row: (5 sc, dec) * 6 (36)

42-43 row: 36 sc

44 row: (4 sc, dec) * 6 (30)

45 row: 30 sc

46 row: (3 sc, dec) * 6 (24)

47 row: 24 sc

48 row: (1 sc, dec) * 8 (16)

49-51 row: 16 sc (3 rows)

Fasten the thread.

Pens

We start knitting with beige yarn.

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row: (3 sc, inc) * 3 (15)

4-6 row: 15 sc

7 row: (3 sc, dec) * 3 (12)

8 row: 12 sc

Change the yarn to white.

9-16 row: 12 sc (8 rows)

17 row: (dec, 4 sc) * 2 (10)

18-20 row: 10 sc (3 rows)

21 row: dec, 8 sc (9)

22-24 row: 9 sc

Fasten the thread. Sew handles at level 47 of the body.

Head

Knit with beige yarn. We start to knit from the bottom up!

We collect a chain of 18 ch

1 row: 3 sc in the 2nd loop from the hook, 15 sc, 3 sc in the last loop

chains, 15 sc (36)

2 row: 3 inc, 15 sc, 3 inc, 15 sc (42)

3 row: (1 sc, inc) * 3, 16 sc, inc, (1 sc, inc) * 2, 15 sc (48)

4th row: (2 sc, inc) * 3, 17 sc, inc, (2 sc, inc) * 2, 15 sc (54)

5 row: (3 sc, inc) * 3, 18 sc, inc, (3 sc, inc) * 2, 15 sc (60)

6 row: (4 sc, inc) * 3, 19 sc, inc, (4 sc, inc) * 2, 15 sc (66)

7 row: (5 sc, inc) * 3, 20 sc, inc, (5 sc, inc) * 2, 15 sc (72)

8 row: (6 sc, inc) * 3, 21 sc, inc, (6 sc, inc) * 2, 15 sc (78)

9 row: (7 sc, inc) * 3, 22 sc, inc, (7 sc, inc) * 2, 15 sc (84)

10 row: (8 sc, inc) * 3, 23 sc, inc, (8 sc, inc) * 2, 15 sc (90)

11-17 row: 90 sc (7 rows) We make holes for the eye.

18 row: 35 sc, 2 ch (skip 2 loops), 3 sc, 2 ch (skip 2 loops), 48 sc (90)

19-20 row: 90 sc (2 rows)

21 row: 12 sc, dec, (16 sc, dec) * 4, 4 sc (85)

22 row: 85 sc

23 row: 11 sc, dec, (15 sc, dec) * 4, 4 sc (80)

24 row: 80 sc

25 row: 10 sc, dec, (14 sc, dec) * 4, 4 sc (75)

26 row: 75 sc

27 row: 9 sc, dec, (13 sc, dec) * 4, 4 sc (70)

28 row: 8 sc, dec, (12 sc, dec) * 4, 4 sc (65)

29 row: 65 sc

30 row: 7 sc, dec, (11 sc, dec) * 4, 4 sc (60)

31 row: (8 sc, dec) * 6 (54)

Cooking eyes. Cut from felt 2 white circles. Insert the eyes into

our finished holes.

32 row: 54 sc

33 row: (7 sc, dec) * 6 (48)

34 row: (6 sc, dec) * 6 (42)

35 row: 42 sc

Take a piece of wire 20 cm. Insulate the ends (I wrap

adhesive tape). We insert the wire and stuff a little.

36 row: (5 sc, dec) * 6 (36)

37 row: (4 sc, dec) * 6 (30)

38 row: (3 sc, dec) * 6 (24)

39 row: (2 sc, dec) * 6 (18)

40 row: 9 dec

Close knitting. Pull off. Embroider mouth, eyebrows, nose.

Hood

We knit with white yarn.

We dial 9 ch

1 row: 3 sc to the 2nd loop from the hook, 6 sc, 3 sc to the last loop, 6 sc (18)

2 row: 3 inc, 6 sc, 3 inc, 6 sc (24)

3 row: (1 sc, inc) * 3, 7 sc, inc, (1 sc, inc) * 2, 6 sc (30)

4th row: (2 sc, inc) * 3, 8 sc, inc, (2 sc, inc) * 2, 6 sc (36)

5 row: (3 sc, inc) * 3, 9 sc, inc, (3 sc, inc) * 2, 6 sc (42)

6 row: (4 sc, inc) * 3, 10 sc, inc, (4 sc, inc) * 2, 6 sc (48)

7 row: (5 sc, inc) * 3, 11 sc, inc, (5 sc, inc) * 2, 6 sc (54)

8 row: (6 sc, inc) * 3, 12 sc, inc, (6 sc, inc) * 2, 6 sc (60)

9 row: (7 sc, inc) * 3, 13 sc, inc, (7 sc, inc) * 2, 6 sc (66)

10 row: (8 sc, inc) * 3, 14 sc, inc, (8 sc, inc) * 2, 6 sc (72)

11 row: (9 sc, inc) * 3, 15 sc, inc, (9 sc, inc) * 2, 6 sc (78)

12 row: (10 sc, inc) * 3, 16 sc, inc, (10 sc, inc) * 2, 6 sc (84)

13 row: (11 sc, inc) * 3, 17 sc, inc, (11 sc, inc) * 2, 6 sc (90)

14 row: (12 sc, inc) * 3, 18 sc, inc, (12 sc, inc) * 2, 6 sc (96)

15-25 row: 96 sc (11 rows)

26 row: 93 sc, 2 ch, skip 2 loops, 1 sc (96)

27 row: 93 sc, 2 sc over the air chain, 1 sc (96)

28 row: 96 sc

29 row: (14 sc, dec) * 6 (90)

30 row: 90 sc

31 row: we tie with a “crustacean step”

We cut the thread and hide it. We pass the wire through the hole in the 26th row and put on the head.

Skirt

We knit with white yarn.

1 row: dial 54 ch, connect into a ring

2 row: 2 ch (lift), 54 dc, sl-st in the first loop

3 row: 2 ch (lifts) – start knitting in the same loop, (2 dc, 2 dc +

ch + 2 dc (in one loop), 2 dc) * 18, sl-st in the first loop (144)

4 row: 2 ch (lifts) – start knitting in the same loop, (2 dc, dc +2

ch + dc (in ch of the previous row), 2 dc, skip 2 dc previous row) * 18,

sl-st in the first loop (108)

5 row: 2 ch (lifts) – start knitting in the same loop, (2 dc, 2 dc + 2

ch + 2 dc (in 2 ch previous row), 2 dc, skip 2 dc front row) x 18, sl-st in

first dc (144)

6 row: ch, sc in each loop of the previous row (180)

Change the thread to yellow.

7 row: we tie with a “crustacean step”

Boots (2 parts)

Knit with yellow yarn.

We dial 7 ch

1 row: 3 sc in the 2nd loop from the hook, 4 sc, 3 sc in one loop, 4 sc, sl-st in the first sc (14)

2 row: 1 ch, 3 inc, 4 sc, 3 inc, 4 sc, sl-st in the first sc (20)

3 row: 1 ch, (1 sc, inc) * 3, 5 sc, inc, (1 sc, inc) * 2, 4 sc, sl-st in the first sc (26)

4-6 row: 1 ch, 26 sc, sl-st in the first sc

7 row: 1 ch, 3 sc, dec, 6 sc, 7 dec, 1 sc (18), sl-st in the first sc

8 row: 1 ch, 10 sc, 5 ch, skip 7 loops (sc), sc to the last

loop, sl-st at first sc (11)

Wings (2 parts)

We knit with white yarn.

We type 17 ch

1 row: from the 2nd loop from the hook, 11 sc, inc, 2 sc, inc, 1 sc (18)

2 row: 1 ch, turn, 18 sc

3 row: 1 ch, turn, inc, 15 sc (17)

4 row: 1 ch, turn, dec, 15 sc (16)

5 row: 1 ch, turn, inc, 13 sc (15)

6 row: 1 ch, turn, dec, 13 sc (14)

7 row: 1 ch, turn, dec, 10 sc (11)

8 row: 1 ch, turn, dec, 9 sc (10)

9 row: 1 ch, turn, dec, 6 sc (7)

10 row: 1 ch, turn, dec, 5 sc (6)

11 row: 1 ch, turn, dec, 2 sc, ub (4)

12 row: tie the wing in a circle sc, making 3 sc in each corner.

Next, change the yarn to yellow.

13 row: we bind in a circle sc, making 2 sc in each corner.

Fasten the thread and sew to the body.

Nimbus

Knit with yellow yarn.

1 row: 6 sc into magic ring

2-56 rows: 6 sc (55 rows)

Prepare a piece of wire by bending the edges first and

isolating the ends. The length of the wire should be equal to the length,

the resulting tourniquet.

Insert the wire and sew into the ring. Sew a halo to the hood

(the place of sewing about 2 cm should be).

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *